Blog

Yes, but not inside the same booth. A powder coating line can share its conveyor, pretreatment stage and curing oven with a liquid paint zone.

No, not by spraying alone. A powder coating plant coats the outside of a transformer tank very well, yet it cannot coat the inside. Powder

Fading that appears a year after delivery rarely starts with the powder. In most cases a powder coating line leaves the resin under-cured, the film

The line is running. No machine is down. The parts look the same as they did last month. Still, output sits below the rated figure,

The paint drum is empty, but the production target has not changed. The workpieces are the same, and the coating specification is still the same.

Paint sagging is one of the most frustrating defects in industrial spray painting. It appears as a downward flow, run, or thickened area on a

Choosing a coating line manufacturer is not simply about finding a company that can supply equipment. A coating line is a complete production system. Pretreatment,

Cross-contamination between colors is one of the most frustrating problems in an automatic powder coating line. A small amount of leftover powder can create visible

Choosing a recovery system is one of the most important decisions when planning a powder coating booth. The recovery method affects color change, powder reuse,